Book it
- Wire Pull Kit (Cannon 6K + 2 ropes + spool stands)Puller, two 300 ft ropes, spool stands. $1,250 deposit.From $245/dayBook the Wire Pull Kit (Cannon 6K + 2 ropes + spool stands)
- Cannon 6K Wire Puller (3K/6K)4-speed dual capstan, no anchoring. $1,000 deposit.From $175/dayBook the Cannon 6K Wire Puller (3K/6K)
- Pull Rope, 300 ft300 ft pulling rope. 2 available.From $30/dayBook the Pull Rope, 300 ft
- Wire Spool Stand Set (reel stands + spindle)Two reel stands plus spindle.From $35/dayBook the Wire Spool Stand Set (reel stands + spindle)
Free pickup in Pierce County; exact location sent after booking. Delivery is $200 each way; your job-site address is checked at checkout.
Kit or separate pieces
The wire pull kit is the full setup: the Cannon 6K wire puller, two 300 ft pull ropes and the wire spool stand set (reel stands plus spindle).
Need only part of it? Each piece books on its own: the Cannon 6K wire puller, the 300 ft pull rope (2 available) and the spool stand set.
The kit costs less than booking the same pieces one by one: $245 vs $270 a day, $700 vs $780 a week, $1,640 vs $1,820 for 4 weeks.
Rope and safety details are on each product page. Read the Cannon 6K, pull rope and wire pull kit pages before you book.
Common wire pulling jobs
- Service and panel upgrades: Pull wire through conduit for a panel or service upgrade.
- Detached shop, barn or ADU power: Pull feeders through conduit to an outbuilding.
- EV charger circuits: Long conduit runs from the panel to a garage or driveway charger.
- Warehouse and equipment circuits: Long runs for panels and equipment circuits in shops and warehouses.
Trenching for underground conduit? Read the mini excavator rental guide. Working overhead? Read the scissor lift rental guide.
Rates
| Item | Day | Week | 4 weeks |
|---|---|---|---|
| Wire pull kit | $245 | $700 | $1,640 |
| Cannon 6K puller | $175 | $525 | $1,250 |
| Pull rope, 300 ft | $30 | $90 | $225 |
| Spool stand set | $35 | $75 | $120 |
Deposit: $1,000 for the Cannon 6K, $1,250 for the kit; deposit terms are on each product page. Prices are before WA sales tax and the 1.25% heavy equipment rental tax where it applies. Your exact total shows at checkout.
How booking and pickup work
- Pick open dates on the kit or puller page and book online at least 1 day ahead.
- Bring a valid driver's license and your job-site address. Full rental terms are shown at checkout.
- Free pickup in Pierce County; exact location sent after booking. Standard pickup is 9 AM and standard return is 3 PM.
- The Cannon 6K page lists a pickup weight of 163 lb, so bring a helper or a truck with a ramp or liftgate.
- Rather not haul it? Delivery is $200 each way; your job-site address is checked at checkout.
Official resources
- L&I: Electrical permits, fees and inspections: Washington L&I's starting page for electrical permits and inspections, including which office covers your job site.
- L&I: City electrical permits and inspections: the cities that run their own electrical permits and inspections.
- Chapter 296-46B WAC: Washington's electrical safety standards, administration and installation rules.
- OSHA: Electrical: OSHA's overview of electrical hazards, standards and training.
- WA 811: free utility locate requests before you trench for conduit.
Summaries for planning only; follow the linked official text. Area pages note each town's electrical permit office: Puyallup · Bonney Lake · Sumner · Auburn · Enumclaw.
Questions
How much does it cost to rent a wire puller?
The Cannon 6K wire puller is $175 a day, $525 a week or $1,250 for 4 weeks, with a $1,000 deposit. The wire pull kit is $245 a day, $700 a week or $1,640 for 4 weeks, with a $1,250 deposit. Prices are before WA sales tax and the 1.25% heavy equipment rental tax where it applies. Your exact total shows at checkout.
What comes in the wire pull kit?
The Cannon 6K wire puller, two 300 ft pull ropes and the wire spool stand set (reel stands plus spindle).
Can I rent the pull rope or spool stands on their own?
Yes. The 300 ft pull rope is $30 a day, $90 a week or $225 for 4 weeks, and 2 are available. The spool stand set is $35 a day, $75 a week or $120 for 4 weeks.
Where are the rope and safety details?
On each product page. Read the Cannon 6K, pull rope and wire pull kit pages before you book and before you pull.
How heavy is the puller to pick up?
The Cannon 6K page lists a pickup weight of 163 lb. Bring a helper or a truck with a ramp or liftgate, or choose delivery for $200 each way.
Can you deliver it?
Yes. Delivery is $200 each way; your job-site address is checked at checkout. Or choose pickup: Free pickup in Pierce County; exact location sent after booking.
Is an operator included?
No. These are bare equipment rentals, and you or your trained crew run the equipment.
How do I book?
Pick open dates on the kit or puller page and book online at least 1 day ahead. Full rental terms are shown at checkout.
More guides: mini excavator · dump trailer · scissor lift.